Fantic Caballero 125 series User Manual

Locates and explains the importance of the vehicle's unique VIN.

Identifies the location and purpose of the engine identification number.

Guidelines for safe operation, rider conduct, and vehicle handling.

Recommendations for appropriate rider protective gear and its importance.

Explains how to engage and disengage the steering lock mechanism.

Step-by-step guide for starting the motorcycle engine.

Steps to take for moving the motorcycle after the engine has started.

Explanation of how to shift gears and general riding familiarity.

Proper procedure for turning off the motorcycle's engine.

Schedule of recommended maintenance tasks and intervals.

Instructions for checking, changing, and the type of engine oil to use.

Specifies recommended tyre pressures for optimal vehicle performance and safety.

Instructions on how to adjust the clutch cable length for proper operation.

Proper procedures and safety precautions for refueling the vehicle's fuel tank.

Information on brake fluid properties, handling, and disposal.

General information on disk brake operation, maintenance, and safety.

Checks for front brake fluid level, pads, and disks.

Checks for rear brake fluid level and general system condition.

Instructions for adding brake fluid to the rear brake system.

Procedure for checking the wear of brake pads.

Details on front suspension checks and adjustments.

Information on the rear suspension unit and its connection points.

How to adjust the rear suspension spring preload based on rider weight and style.

Instructions for adjusting the hydraulic damping of the rear shock absorber.

Outlines the requirements and obligations for maintaining warranty validity.

Lists conditions and parts not covered under the manufacturer's warranty.