4. HOW TO USE
How to assemble
Insert the nozzle(or hose) into the Vacuum Cleaner Body firstly.
Select the suction head according to your needs and install it to the corresponding port to use.
The two cleaner heads can be used separately or in combination.
How to disassemble
Press the nozzle(or hose) button by hand or other tool and pull out the nozzle (or hose).
Other accessories can be pulled out directly
How to charge
How to use
On/Off Button:
Short press to turn on the device (floodlight on), and press
again to turn off (floodlight off).
Speed Switch Button:
Speed switch button
On/Off button
click
USB-C
04
1. Please use a 5V DC 3A/ 9V DC 2A max power adapter (not
included) and the type-C charging cable(included) to charge.
The type-C charging cable can only be used for charging.
2. It takes about 2-2.5 hours to fully charge. You can use the
device in high speed mode for about 14 minutes or in low
speed mode for about 30 minutes after full charge.
3. The lithium-ion battery must be FULLY charged before
first use and after long-term storage.
4. It is recommended to charge the device every three
months.
Low speed with ECO mode by default. Short press the Speed
Switch Button to switch to
Max speed, and press again to switch back (Long press the button
for 1.5 seconds to turn off the light).
To Next Page
Loading...