What to do if the FAR DGV18CH Hob flame is extinguished during use?
If the flame is extinguished during use, it might be because the flame supervision device is contaminated; clean it. Alternatively, products may have boiled over; turn off the burner, wait a minute, and re-ignite. A strong air current could also be the culprit; turn off the burner, check for open windows, wait a minute, and try again.
Why my FAR DGV18CH doesn't ignite correctly?
If your hob ignites incorrectly, it could be due to several reasons. Make sure the gas supply is completely open. Check that the burner cover is correctly assembled. The ignition socket might be contaminated, so clean it with a damp cloth. Ensure the burners are thoroughly dry and that the holes in the flame spreader aren't blocked; if they are, clean the flame spreader.
How to fix no ignition on my FAR Hob?
If there is no ignition, check the electrical supply. Ensure the burner cover is correctly assembled. Also, verify that the gas supply is fully open.
Why is there a noise during combustion and ignition on my FAR DGV18CH?
A noise during combustion and ignition may occur if the burner cover is not assembled correctly. Ensure that the cover is properly assembled.
Why is my FAR Cooker not igniting?
If your FAR Cooker isn't igniting, it could be due to several reasons. First, check the electrical supply to ensure there's a spark. Another possible cause is an incorrectly assembled burner cover; make sure it's properly assembled. Finally, verify that the gas supply is completely open.
What to do if the flame on my FAR Cookers keeps extinguishing?
If the flame on your FAR Cooker keeps extinguishing during use, there are a few things you can check. First, the flame supervision device might be contaminated; try cleaning it. Also, if products have boiled over, turn off the burner, wait a minute, and try igniting it again. A strong air current could also be the culprit; turn off the burner, check for open windows, wait a minute, and then try again.
How to fix a FAR Cookers that ignites incorrectly?
If your FAR Cooker is igniting incorrectly, start by ensuring the gas supply is fully open. Also, check that the burner cover is correctly assembled. If those aren't the issue, the ignition socket might be contaminated; clean it with a damp cloth. Wet burners can also cause this problem, so thoroughly dry them. Lastly, check for blocked holes in the flame spreader and clean it if necessary.
Why is there a noise during combustion and ignition in my FAR Cookers?
If you're experiencing noise during combustion and ignition with your FAR Cooker, it's likely that the burner cover is not assembled correctly. Ensure that the cover is properly assembled.
General| Number of burners | 4 |
|---|---|
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Type | Gas |
| Gas Type | LPG |
To Next Page
