EasyManua.ls Logo

FAR FMO 20 W/2 - Page 36

FAR FMO 20 W/2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
GB-16
Splashes on the inside of the door, as well as
on the door seals and adjacent parts must be
cleaned daily with warm soapy water.
In the event that the seals or adjacent parts
have deteriorated, the oven must not be used
until these have been restored by a qualied
After-Sales service.
Never pour water into the oven.
Do not put water into the air vents on the
top, sides of back of the appliance.
Always ensure that your oven is has stopped
fully before cleaning by unplugging from the
mains power.
Keep the oven's internal cavity clean and
dry by cleaning it regularly with a soft cloth.
Do not use abrasive materials as you risk
scratching or damaging the paint.
Rinse and dry with care. It is best to clean the
metal parts of the door using a damp cloth.
Do not use a brush, sponge scourer or abrasive
cloth, or any other liquid that may damage the
turntables drive motor.
e exterior of the oven is metal. Clean it
using a cloth dampened with warm soapy
water. Rinse and dry with a soft cloth.

Related product manuals