ENGLISH
GB-36
Washing the lter in washing machine:
1. Screw o the inlet pipe from the backside of
the machine.
2. Pull out the lter with long nose pliers and
reinstall it back after being washed.
3. Use the brush to clean the lter.
4. Reconnect the inlet pipe.
Note!
• If the brush is not clean, you can pull out the
lter washed separately;
• Reconnect, turn on the tap.
Clean The Detergent Dispenser
1. Press down the arrow location on softener
cover inside the dispenser drawer.
2. Lift the clip up and take out softener cover
and wash all grooves with water.
3. Restore the softener cover and push the
drawer into position.
To Next Page
Loading...
