ENGLISH
GB-3
Warning!
The electric shock!
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid
a hazard.
• e device must be connected to the water
distribution network using the new connection
sets supplied with the device; used connection
sets must not be reused.
• Before any maintenance the device, unplug the
appliance from the mains.
• Always unplug the machine and turn o the
water supply after use. e max. inlet water
pressure, in 1 MPa. e min. inlet water
pressure, in 0.05 MPa.
• To ensure your safety, power plug must be
inserted into an earthed three-pole socket.
Check carefully and make sure that your
socket is properly and reliably earthed.
• Make sure that the water and electrical devices
must be connected by a qualied technician
in accordance with the manufacturer’s
instructions and local safety regulations.
To Next Page
Loading...
