ENGLISH
GB-39
Caution!
• Make sure that valve cap and emergency
drain hose are reinstalled properly, cap plates
should be inserted aligning to hole plates
otherwise water may leak.
• Some machines don’t have emergency drain
hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water
run into basin.
• When the appliance is in use and depending
on the programme selected there can be hot
water in the pump. Never remove the pump
cover during a wash cycle, always wait until
the appliance has nished the cycle, and is
empty. When replacing the cover, ensure it is
securely re-tightened.
To Next Page
Loading...
