FAR LF912RL21W - Page 43

ENGLISH
GB-42
Description Reason Solution
Water
injecting
problem while
washing
Check if the
water pressure is
too low
Straighten the
water pipe
Check if the inlet
valve lter is
blocked
Overtime
water
draining
Check if the
drain hose is
blocked
Water
overow
Restart the
washer
Others Please try again
rst, call up
service line if
there are still
troubles
 Note!
• After the check, activate the appliance. If the
problem occurs or the display shows other
alarm codes again, contact the service.