ENGLISH
GB-6
• e washing machine with single inlet valve
only can be connected to the cold-water
supply. e product with double inlet valves
should be correctly connected to the hot water
and cold-water supply.
• Plug must be accessible after installation.
• Remove all packages and transport bolts
before using the appliance. Otherwise,
serious damage may result. Risk of damaging
appliance!
Risk of damaging appliance
• Your product is only for home use and is only
designed for the textiles suitable for machine
washing.
• Do not climb up and sit on top cover of the
machine.
• Do not lean against machine door.
• Cautions during Handling Machine:
1. e accumulated water shall be drained out
of the machine.
2. Handle the machine carefully. Never hold
each protruded part on the machine while
lifting. Machine door cannot be used as the
handle during the conveyance.
To Next Page
Loading...
