GB-6
• Plug must be accessible after installation.
Power supply and grounding
• e dryer employs alternative current with the
rated voltage and frequency. When the voltage
uctuates between 6% of rated voltage, the
dryer can work normally. A special power
socket with a capacity 10A for the dryer had
better be set beside the dryer for convenience
and safety. e method of connection of the
socket is as the gure below.
• To be safe, please make
improvements as soon as
possible according to the rules
and suggestions mentioned
above.
Warning!
• e socket and the grounding wire must
be installed by an electrician to prevent
incorrect installation or use of the socket and
to guarantee the safety of use of electricity.
No connection of the grounding wire and the
neutral wire, otherwise the cabinet will be
charged, which is likely to cause the danger of
electric shock.
To Next Page
Loading...
