Farberware FMO11AESBKA - Page 17

17
12. MEMORY FUNCTION
(1) Press "Memory " icon to choose memory 1-3 procedure. The screen will display "MEMORY1",
"MEMORY2", then "MEMORY3".
(2) If the procedure has been set, press " " to use it. If not, continue to set the
procedure. Only one or two microwave stages can be set.
(3) After finishing the setting, press "Memory " to save the procedure and turn back to the standby
modes. Press " " to save and operate the setting.
EXAMPLE: To set the following procedure as the second memory, that is memory 2, and cook the
food with 80% microwave power for 3 minutes and 20 seconds. Follow these steps:
A. In standby mode, press "Memory " icon twice until "MEMORY2" displays.
B. Press "MICROWAVE" three times, "M P80" displays.
C. Press " " to set the power
D. Press " ", " ", " ", or " " to adjust the cooking time to 3minutes and 20 seconds.
E. Press "Memory " icon to save the setting and the oven will beep once.
NOTE:
(1) Weight defrost or Auto menu cooking cannot be set as memory procedure.
(2) If the power is not cut off , the procedure will be saved in memory. If power is lost, the
memory setting needs to be reset.
13. MULTI-STAGE COOKING
At most, 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then
defrosting shall be placed at the first stage automatically.
Note: Auto menu cannot work in the multi-stage cooking.
Example: if you want to defrost food for 5 minutes then cook at 80% microwave power for 7
minutes. The steps are as follows:
(1) Press "WEIGHT/TIME DEFROST" 4 times, The screen will display "TIME DEFROST"
(3) Press " ", " ", " ", or " " to set defrosting time to 5 minutes
(4) Press "MICROWAVE" three times to select 80% microwave power.
(5) Press " " to set microwave power
(6) Press " ", " ", " ", or " " to set cooking time of 7 minutes
(7) Press " " to start cooking.
14. INQUIRING FUNCTION
(1) In the microwave cooking mode, press "MICROWAVE" to check microwave power level, and
the current microwave power will be displayed. After 3 seconds the microwave will return to its
previous mode. The same method can be used to check power in the multi-mode cooking mode.
(2) Press "KITCHEN TIMER/CLOCK" to check the current time. Current time will be displayed for 3 seconds.
15. LOCK FUNCTION FOR CHILDREN
(1) Lock: In standby mode, press "STOP/CANCEL " for 3 seconds, there will be a long "beep"
denoting the entering into the children-lock mode; the lock indicator will light and the screen
will display current time or "LOCKED".
(2) Unlock: In locked mode, press "STOP/CANCEL " for 3 seconds, there will be a long "beep"
denoting that lock is released.
(2) Press " " to confirm the function and the screen will display "TD 0:00".
+ 30SEC
+ 30SEC
+ 30SEC
+ 30SEC
+ 30SEC
+ 30SEC