EasyManua.ls Logo

Farenheit TI-712 - User Manual

Farenheit TI-712
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TI-712/ TI-712B
Detachable 7” Monitor
Touch Screen
DVD/CD/MP3/MP4
AM/FM Radio
With Bluetooth (only for TI-712B)
Owner’s Manual
Take the time to read through this owner’s manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.

Questions and Answers

  • T
    Tammy EllisAug 12, 2025
    What to do if Farenheit TI-712 power does not turn on?
    • J
      Jesse StricklandAug 12, 2025
      If your Farenheit Car Receiver isn't powering on, there are a couple of things to check. First, a blown fuse could be the culprit. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Second, incorrect wiring might be the issue; in this case, it's best to consult your local retailer.
  • N
    newtoncarrieAug 19, 2025
    What to do if nothing happens when buttons are pressed on my Farenheit TI-712 Car Receiver?
    • B
      Brian JimenezAug 19, 2025
      If your Farenheit Car Receiver isn't responding to button presses, it could be due to a couple of reasons. One possibility is that the microprocessor has malfunctioned. To resolve this, turn off the power, then press the [no open] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Alternatively, the panel or main unit connectors might be dirty. Try wiping them off with a soft cloth moistened with cleaning alcohol.
  • A
    Anthony LawrenceAug 27, 2025
    Why is there no sound output when operating my Farenheit TI-712 Car Receiver with amplifiers or power antenna?
    • E
      Eric Mcdonald IIIAug 27, 2025
      If you're experiencing no sound output when using amplifiers or a power antenna with your Farenheit Car Receiver, the power antenna lead might be shorted to ground, requiring excessive current, or there may be an issue with the remote on the amplifiers or power antenna. Here's what you can do: 1. Turn off the unit. 2. Remove all wires attached to the power antenna lead and check each wire for a possible short to ground using an ohm meter. 3. Turn on the unit. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external replay to provide remote-on voltage, as excessive current is required.
  • S
    Steven CarpenterSep 3, 2025
    How to fix bad sound directly after Farenheit Car Receiver power is turned on?
    • N
      Natalie WongSep 3, 2025
      If the sound quality of your Farenheit Car Receiver is poor immediately after turning it on, several factors could be responsible. It could be that the compact disc is dirty, so clean it carefully to avoid scratches. Another possibility is that the compact disc is heavily scratched or warped, in which case you should replace it. Also, water droplets may have formed on the internal lens if the car was parked in a humid place. If this happens, let it dry for about 1 hour with the power on.

Farenheit TI-712 Specifications

General IconGeneral
BrandFarenheit
ModelTI-712
CategoryCar Receiver
DIN SizeSingle DIN
Faceplate SecurityDetachable
BluetoothYes
USB InputYes
SD Card SlotYes
AUX InputYes
Radio TunerAM/FM
Display TypeLCD
Remote ControlYes
Peak Output50W x 4 Channels
Power Output50W x 4 (RMS)

Related product manuals