THE SOUNDS
The keyboard features 100 sounds divided into 7 families (e.g. 067-077 STRINGS).
They are selected when the SOUNDS button is on by entering a three digit number between 001 and 100 of the SOUNDS list
you will find at the end of this Instructions Manual.
Example
: for VIOLIN type in number 067 (0, 6, 7 with the SELECT keyboard.)
If the display shows “Disable”, this means an incorrect number has been typed in.
Sounds can be selected also by using the SELECT “+ / –” buttons.
IMPORTANT:With some sounds you might notice a slight difference of volume or sound quality when playing them in different areas of the key-
board.This is an inevitable consequence of multiple sampling and not a technical problem.
The TRANSPOSER
The TRANSPOSER +/– controls shift the whole keyboard tonality by +/– 6 semitones.
By pressing one of the two buttons, the display temporarily shows the current value.
The TRANSPOSER variation is always indicated on the display by the “< Tr “ or “ Tr > “ signs.
By simultaneously pressing the “+/–“ buttons of TRANSPOSER, you will return to the standard
00 value.
The PIANO
With the PIANO button, the PIANO sound and the chord identifier will be immediately enabled on the whole keyboard.
The METRONOME
The metronome helps you to learn the music, giving the beat during musical exercises and simulating
the traditional time-marking instrument.
It can be turned on and off with the METRONOME button.To change the tempo, use the “TEMPO
+/–“ buttons. To set the volume, press the STYLES or SONGS button and use the VOLUME
ACCOMP. +/– button.
Chart of general BEATS for the METRONOME.
7
HOW TO USE THE KEYBOARD
ENGLISH
TEMPO
40 - 60
60 - 66
66 - 76
76 - 108
108 - 120
120 - 168
168 - 200
200 - 240
Voice in musical scores
Largo
Larghetto
Adagio
Andante
Moderato
Allegro
Presto
Prestissimo
067
Violin
068
Violoncello
069
Strings
070
Slow Strings
071
Crazy Strings
072
Sweet Strings
073
Chamber
074
Viole
STRINGS
067 - 077
FAMILY SOUNDS LIST
To Next Page
Loading...