To Next PageTo Next PageWhat to do if the tractor slides backwards when winching with Farmi Forest Corporation Winches?
If your Farmi Forest Corporation Winches tractor slides backwards while winching, it's likely because the parking brakes aren't engaged or the dozer blade isn't firmly anchoring the unit. To fix this, engage the parking brakes and lower the winch completely to the ground.
Why does the cable get tangled on the drum of my Farmi Forest Corporation JL 351P Winches?
If the cable on your Farmi Forest Corporation Winches gets tangled on the drum, it's probably because the cable is too loose, causing it to be pressed between the loops. To resolve this, loosen the pin, pull the cable from the reel using a tractor, and then reel the cable back in tightly with a load.
How to fix cable kinks on Farmi Forest Corporation JL 351P Winches?
If the cable on your Farmi Forest Corporation Winches develops kinks, the cable brake is likely too loose. To fix this, tighten the drum brake. Also, tighten the cable on the drum by pulling it out and winching with a heavy load.
How to troubleshoot hard to pull cable out on Farmi Forest Corporation Winches?
If you're finding it hard to pull the cable out of your Farmi Forest Corporation Winches, the drum brake is probably too tight. You should loosen the drum brake. Refer to the instructions in "Adjusting the drum brake".
General| Tractive force | 35 kN |
|---|---|
| Cable length | 70 m |
| Cable diameter | 8 mm |
| Power source | PTO |
| PTO speed | 540 rpm |
| Maximum pulling force | 35 kN |
| Wire rope | 8 mm |
Steps for securely attaching the winch cable to the drum.
Essential safety advice before and during machine operation.
Detailed steps and safety for the winching process.
Crucial safety measures before performing maintenance.
