C.3. Slope Adjustment Jacks and Pressure Wheel Height Adjustment
Coulter Connection and Pressure
Wheel Adjustment Elements
The coulters on your grain drill are designed in
parallelogram structure. With this design, all the pressure
wheels can be adjusted simultaneously and evenly.
Hence, the necessity of “adjustment of each pressure
wheel individually” that leads to loss of time and that is
used in conventional methods is eliminated. With the
completion of the adjustment quickly and easily, time and
labor is gained as well as optimum working conditions
are achieved more conveniently.
The height adjustment of the pressure wheels is
made by using the 2 slope adjustment jacks on the
drill.
To Next Page
Loading...