Chain
Housings
D.1.1.3. Clutch:
Each clutch has 2 greasers. (On the left)
D.1.1.4. Mixer Gear:
There is a mixer gear driven by the variable-speed
transmission on the seed transmission side of the
box.
D.1.1.5. Depth Adjustment Lift, Triple Connection
Shaft
There are 2 pieces of triple pins connecting the
main frame of the lift. Each of these triple pins
has 3 pieces of greaser housing but only the
greaser of the 2 shafts to which the lift is
connected (one on the right and one on the left)
must be lubricated.
The depth adjustment lift is connected to the middle
shaft as default and lubrication of the greaser of this
shaft is sufficient (on the left).
To Next Page
Loading...