Need help?Do you have a question about the FarmTek Polaris and is the answer not in the manual?
General| Frequency | 60 Hz |
|---|---|
| Timer Type | Digital |
| Housing Material | Plastic |
| Voltage | 120V |
| Maximum Load | 15A |
| Number of Programs | 8 |
| Operating Temperature | -10°C to 50°C |
Details on battery power, low battery warnings, and power on/off switch for the Polaris timer console.
Covers battery usage, low battery indicators, and storage for wireless electric eyes.
Step-by-step instructions for programming the timer console to recognize electric eye ID codes.
Describes how to turn on and operate the wireless handswitch, including dual handswitch usage.
Explains the permanent ID code for handswitches and how the console learns it.
Steps for setting up electric eyes and the timer console for Barrel Racing.
How to interpret the eye alignment indicator on the timer console.
Explains how the timer operates during a Barrel Racing event, including beam breaks.
Steps for mounting and aligning electric eyes for Roping events.
Interpreting eye alignment indicators for Roping events.
How the timer operates during Roping, including start, stop, and specific event messages.
Explains unique ID codes for electric eyes and re-learning them.
Explains the Average Time event with two timekeepers and internal timers.
Steps to prepare for and operate the Average Time event.
Steps to set up the timer and horn for Bull Riding events.
Details on starting, stopping, and entering scores for Bull Riding.
Setting up electric eyes for Show Jumping events.
How to set course times and electric eye configurations for rounds.
Interpreting eye alignment indicators for Show Jumping.
Detailed operation of the timer for Show Jumping, including rounds and faults.
Setting up three sets of electric eyes for Power & Speed classes.
Interpreting eye alignment indicators for Power & Speed.
Detailed operation of the timer for Power & Speed phases.
Setting up electric eyes for Cutting events.
Interpreting eye alignment indicators for Cutting.
How the timer operates for Cutting events, including scoring and disabling eyes.
Setting up electric eyes for Team Penning.
To Next Page
