To Next PageTo Next Page
Need help?Do you have a question about the Faro Barcelona IBIZA and is the answer not in the manual?
Verify all parts before installation, check foam insert, remove motor from packing, and assemble on a padded surface.
Ensure electricity is off before wiring. All wiring must comply with codes and the fan must be grounded.
Secure the hanger bracket to the ceiling outlet box using provided screws and washers.
This method is preferred for sloped, valuated, or extra-high ceilings.
Attach fan blades to blade arms using small screws, then attach arms to motor housing.
Connect house wiring (Neutral, Live, Earth) to the fan wiring.
Use the balance clip to identify and correct fan wobble by adjusting clip position.
Check screws and attachments twice yearly. Clean with a soft brush or lint-free cloth; do not use water.
Reversing switch controls direction for cooling (downward) or heating (upward) air circulation.
Guide for fan not starting, noisy operation, or oscillation, with solutions and when to call an electrician.
General| IP | 20 |
|---|---|
| Motor type | AC |
| Number of speeds | 3 |
| Reversible function | Yes |
| Suitable for | Indoor |
| Number of Blades | 4 |
| Reversible Rotation | Yes |
| Diameter | 132 cm |
| Material | ABS |
