Getting Started.
Controller Overview.
A. Volume Control: You can adjust the volume from
your audio panel for each ear cup independently.
B. Power Status: Flashes Green when battery supply is
strong. Flashes Amber when battery is low. Flashes
Red when battery is very low.
C. Power Button: Press and hold for one second to
turn the ANR on. Press and hold for one second to
turn o.
D. Bluetooth Status: Flashes Blue and Red when in
pairing mode. Flashes Red twice when disconnected.
Flashes Blue regularly when connected. Short Flash in
blue indicates phone line is busy.
E. Bluetooth Button: Used for connecting and phone
operation shortcuts. Please refer to page 15.
F. Bluetooth Volume Control: Used for adjusting audio
levels from your bluetooth sources.
G. Audio Priority Switch: Controls which audio gets
through.
A - Intercom priority - Bluetooth and Aux are muted
when intercom is active.
B - All audio sources are played together.
C - Intercom only - All audio from sources other than
intercom are muted.
H. Aux Input: Use the provided 3.5 mm cable to
connect your audio source.
10
To Next Page
Loading...