Need help?Do you have a question about the Fast & Fluid Management IDEX Tintmaster TM300 and is the answer not in the manual?
General| Brand | Fast & Fluid Management |
|---|---|
| Model | IDEX Tintmaster TM300 |
| Category | Water Dispenser |
| Language | English |
Defines the machine's sole purpose as dispensing colorants into cans, prohibiting all other applications.
Mandates written permission from the supplier before performing any machine installation procedures.
Explanation of graphic symbols displayed on the machine, indicating specific hazards or instructions.
Guides users through the general process of dispensing colorants, including essential safety warnings.
Step-by-step instructions for performing a standard dispensing operation, from can placement to removal.
Instructions for correctly positioning the can on the can table, aligning it with the central mark.
Detailed procedure for raising the can table using the handle and foot pedal to the sensor position.
Detailed procedure for lowering the can table after dispensing, using the handle and foot pedal.
Covers essential maintenance tasks, including cleaning and component checks, for optimal machine performance.
Instructions for cleaning the machine with a cloth to remove spilled colorants or liquids.
Explains the correct and safe operation of the emergency stop switch for immediate machine shutdown.
A methodical approach to diagnosing and resolving common machine issues using manual information or contacting service.
Information on how to contact technical support, including details needed like model and serial number.
Lists common error codes displayed on the computer and their corresponding causes and solutions.
To Next Page