Need help?Do you have a question about the Fast & Fluid Management SK450 and is the answer not in the manual?
Overview of the shaker's design, research, components, and user-friendliness.
Details F&FM's warranty conditions, coverage, exclusions, and claim procedures.
Confirms machine compliance with essential safety and hygiene requirements.
Numbered list of SK450/SK550 parts with labels corresponding to a diagram.
Essential safety guidelines for installation, operation, and maintenance to prevent injury and damage.
Critical warnings for frame lock removal, power connection, emergency stop, and moving parts.
Instructions for unpacking and removing the frame lock, emphasizing careful handling.
Procedure for removing remaining frame lock parts and connecting power before closing door.
Guidance on removing the shaker from its skid and ensuring all frame lock parts are gone.
Instructions for lowering, leveling with adjustable feet, and securing them.
Procedure for connecting the power cable and ensuring the emergency stop is unlocked.
Guidance for initial use, frame lock removal confirmation, and power state management.
Details on unlocking emergency stop, machine power-on, and correct shutdown procedures.
Instructions for positioning containers, using filler discs, and preparing for shaking.
Explanation of control panel layout: emergency stop, program keys, timer keys.
Steps for placing cans, selecting programs, and initiating the clamping and mixing process.
Instructions for stopping, interrupting programs, and safely removing containers.
Guide to adjusting software presets: door lock, clamp plate, and standby interval.
Using the U2 option to manually lock or unlock the machine door after power interruptions.
Using the U3 option to force clamp plate movement when it jams in upper or lower position.
Setting the time delay for the machine to enter standby mode using the U4 option.
Instructions for cleaning spilled paint and benefits of periodic greasing for optimal performance.
Guidance on solving issues by checking simple solutions before contacting the Service Department.
Chart listing machine symptoms, their causes, and recommended actions for troubleshooting.
Continues the troubleshooting chart for issues with clamping plates and container unlatching.
List of machine error codes, their causes, and the corresponding resolution actions.
Information on contacting service or manufacturer, including necessary details for support.
Step-by-step guide for replacing a blown fuse, including fuse type and troubleshooting tips.
Detailed technical data for the SK450/SK550, including dimensions, weight, and power.
Detailed schematic illustrating electrical connections and components of the SK450/SK550.
Information on the environmental impact and proper disposal of the machine's packaging material.
Guidance on proper disposal and recycling of the machine at the end of its service life.
General| Brand | Fast & Fluid Management |
|---|---|
| Model | SK450 |
| Category | Paint Sprayer |
| Language | English |
To Next Page
