Fastbind Pureva XT - Thermal Protections; Thermal Casing; Heat Shield

FASTBIND PUREVA XT USER MANUAL | v 1.0 | © Maping Co 2014
14
DRAFT
9. THermal ProTecTIons
THERMAL CASING
• The machine is delivered with a separate
thermal casing cover for the glue cartridge.
• Only touch or move the thermal casing covers
by the handles. All other surfaces are very hot.
• The casing cover is designed to protect the user
from the hot surfaces inside the glue cartridge/
heating dock
• The thermal casing must be removed to open
the glue tank cap or when installing or removing
the glue cartridge
HEAT SHIELD
• The machine is delivered with a separate front
heat shield.
• The purpose of the front heat shield is to protect
the user from hot parts and hot glue drops.
• The front heat shield should always be installed
with the following exceptions:
o
When the heat shield needs to be removed
temporarily to install or remove the glue
cartridge or to remove or add drop trays
9. THERMAL PROTECTIONS
Figure 9-1 Thermal casing and heat shield