FASTBIND PUREVA XT USER MANUAL | v 1.0 | © Maping Co 2014
7
DRAFT
installing stOrage tray
• ThemachineisdeliveredwithaseparateTeoncoatedplatform.
• The storage tray is placed on top of the machine, on the upper
right corner.
• The storage tray is intended for storing hot parts when the glue
tankisre-lled.
• The platform has enough space for the thermal casing, the glue
tank cap and the cap hook.
eva -glue
4. Glue, Glue carTrIdGe
pur -glue
• Recommended glue: Fastbind hot melt type 5.1, for normal
binding operations
• Generic glue for normal papers
• The EVA glue can be left in the cartridge at all times (no need for
draining or cleaning).
• Select the EVA -temperature setting on the control panel.
• PURglueisusedforpaperthatisdifculttobindwithEVAglue
• Sold in granules (Contact Fastbind for more information)
• Fume extraction recommended, unit should not be operated
without positive ventilation.
• Once cleaned of PUR glue, the glue cartridge can be used
multiple times.
• If the glue head is not cleaned immediately after use, the PUR glue
solidiesandthecartridgehastobereplaced.Thecartridgesare
inexpensive and can easily be replaced, contact Fastbind for more
information.
• Select the PUR -temperature setting on the control panel.
glue cartridge
• One PUR and one Eva glue cartridge are included in the delivery.
• Both cartridge types are also available as accessories. They are
delivered without the tank cap (the main tank cap is included with
the machine and should be retained when replacing the cartridge.
If a cap is needed, it can be ordered separately.
cleaning the pur glue cartridge
• APURgluecartridgehastobedrainedandushedtwicewithEVA
after use. Leave a small amount of EVA glue in the tank to protect
the glue cartridge during the storage.
• Drain the glue cartridge by applying glue using a chip board (gray
board) or other thick paper substrate.
3. MACHINE INSTALLATION & 4. GLUE AND GLUE CARTRIDGE