Fastbind Pureva XT - Control Panel and Temperature Control; Selecting the Temperature; Standby;Auto-Off Feature

FASTBIND PUREVA XT USER MANUAL | v 1.0 | © Maping Co 2014
8
DRAFT
selecting the teMperature
5. conTrol Panel and TemPeraTure conTrol
standby/ autO-Off
• The control panel indicates the selected temperature (PUR or EVA).
• SelectPURwhentheglueheadislledwithPUR-glueandEVA
whentheglueheadislledEVA–glue.
• When the indicator light is blinking, the glue head has not yet
reached the selected temperature.
• The machine is equipped with timer and auto-off feature.
• The timer starts when the machine is switched on.
• Pressing the temperature selection button resets the timer to zero.
• Auto-off turns the heaters off after 10 hours.
• When the auto-off has turned the heaters off, the red standby –
light is lit.
• When the temperature selection button is pressed, the machine
starts heating again.
5. CONTROL PANEL AND TEMPERATURE CONTROL