To Next PageTo Next PageWhat to do if my FASTEN-PRO Staple Gun jams?
If your FASTEN-PRO Staple Gun is jamming, here's what you can do: 1. Pull out the Staple Channel. 2. Remove any jammed fasteners from the channel, using long-nosed pliers if necessary (not included). 3. Ensure you're using the correct size fasteners. 4. Consider replacing the Staple Channel.
Why my FASTEN-PRO Staple Gun does not staple?
Your FASTEN-PRO Staple Gun might not be stapling due to several reasons: * Staples may not be loaded correctly. Verify that staples are loaded into the Magazine Unit flat and with prongs facing upward. * The Magazine Unit might not be fully and properly inserted into the Staple Gun. Check that the Magazine Unit is fully inserted. * The lever may not be pulled completely up and then fully pressed down.
General| Brand | FASTEN-PRO |
|---|---|
| Model | 96755 |
| Category | Staple Gun |
| Language | English |
Defines the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Provides overarching safety rules for operating power tools.
Safety guidelines for maintaining a safe work environment.
Safety guidelines to protect the operator during tool use.
Guidance on proper tool maintenance and when professional servicing is required.
Identifies and labels the main functional components of the staple gun.
Instructions for preparing the work area and workpiece before operation.
Steps for routine cleaning, maintenance, and lubrication of the tool.
Procedures for cleaning the staple channel and removing jammed fasteners.
Lists all parts of the staple gun with descriptions and quantities.
