HEADDEMOCK
SUPERB
YOUR
HEADDEMOCK
SUPERB IS
READY!
ASSEMBLY INSTRUCTIONS
1. Remove the small grey
caps at both ends of
each corner piece.
2. Make sure the holes in the middle pole of
the stand are pointed downwards so they
will ‘click’ in the corner pieces nicely.
3. Connect the corner pieces to the middle pole.
Be sure to use the correct end of the corner
piece (the balance pole needs to be
positioned before the corner).
4. Finally, connect the remaining
poles to the corner pieces. Your frame
is ready and should look like this:
5. Now that your frame is
ready, you can attach the
headdemock straps to the
hooks on both sides.
6. You can easily adjust the distance
between the headdemock and
the ground by tightening or
loosening the straps.
That’s it!
To Next Page
Need help?
General