rockcoco
assembly manual
STEP 4
Slide large arm no. 2 in corresponding hole of construction
ring until it is pushed all the way through.
STEP 6
Repeat step 4 and 5 for the other 3 large arms and put the
RockCoco on a flat surface.
Enjoy your halfway result for a moment!
STEP 5
Click large arm no. 2 on the mounting plate.
To click large arm no. 2 on the mounting plate it might be
necessary to bend the arm a bit.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 5 15/12/14 10:35
To Next Page
Loading...
