rockcoco
assembly manual
STEP 7
Take arm no. 1 of the 5 small arms and slide it into one of
the corresponding inner holes of the construction ring until
it is slid all the way through.
STEP 9
Position the cable house with Led strings in the middle of
the chandelier. Be aware of the difference in size of the Led
cables for the short arms and long arms!
STEP 8
Repeat step 7 for the other 4 small arms and wipe the sweat
from your forehead if necessary... Looks good right?
Make sure the small arm makes contact
with the construction ring.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 6 15/12/14 10:35
To Next Page
Loading...
