FATEK FBs-6AD User Manual

【Hardware】
Contents
Chapter 1：Introduction of FATEK FBS Series PLC
1.1 Appearance of Main Unit...............................................................................................................H1-1
1.2 Appearance of Expander/Module.................................................................................................H1-2
1.3 Appearance of Communication Expansion Module ....................................................................H1-4
1.4 List of FBS-PLC Models ................................................................................................................H1-5
1.5 Specifications of Main Unit ............................................................................................................H1-7
1.6 Environmental Specifications ........................................................................................................H1-8
1.7 Connection Diagrams of Various Models.....................................................................................H1-9
1.7.1 NC Control Main Unit..............................................................................................................H1-9
1.7.2 Basic/Advanced Main Unit .....................................................................................................H1-10
1.7.3 Digital I/O Expander................................................................................................................H1-12
1.7.4 Digital I/O Expansion Module.................................................................................................H1-13
1.7.5 High-Density Digital I/O Expansion Module ..........................................................................H1-14
1.7.6 Numeric I/O Expansion Module.............................................................................................H1-14
1.7.7 Analog I/O Expansion Module ...............................................................................................H1-14
1.7.8 Temperature Input Module.....................................................................................................H1-15
1.7.9 Expansion Power....................................................................................................................H1-15
1.7.10 Communication Module (CM)..............................................................................................H1-16
1.7.11 Communication Board (CB).................................................................................................H1-17
1.8 Drawings with External Dimensions .............................................................................................H1-18
Chapter 2：System Architecture
2.1 Single-Unit System of FBS-PLC...................................................................................................H2-1
2.2 Formation of Multiple Units............................................................................................................H2-2
2.2.1 Connection of multiple FBS-PLC...........................................................................................H2-2
2.2.2 Connection of FBS-PLC with host computer or intelligent peripherals................................H2-3
Chapter 3：Expansion of FBS-PLC
3.1 I/O Expansion.................................................................................................................................H3-1

FATEK FBs-6AD Specifications

General

Brand	FATEK
Model	FBs-6AD
Category	Controller
Language	English

Summary

Chapter 1: Introduction of FATEK FBS Series PLC

1.4 List of FBS PLC Models

1.5 Specifications of Main Unit

Outlines the technical specifications of the FBS-PLC main unit.

1.6 Environmental Specifications

Details the operating environmental conditions required for the FBS-PLC.

1.7 Connection Diagrams of Various Models

Illustrates the wiring and connection diagrams for different FBS PLC models.

Chapter 3: Expansion of FBS-PLC

3.1 I/O Expansion

Details the process and methods for expanding the PLC's I/O capabilities.

Chapter 4: Installation Guide

4.1 Installation Environment

Specifies the recommended installation environment for the PLC.

4.2 PLC Installation Precautions

Provides essential precautions for safely installing the PLC.

4.5 Precautions on Construction and Wiring

Highlights precautions for electrical construction and wiring practices.

Chapter 5: Power Supply Wiring, Power Consumption Calculation, and Power Sequence Requirements

5.1 Specifications of AC Power Sourced Power Supply and Wiring

Details specifications and wiring for AC power supplies.

5.2 Specifications of DC Power Sourced Power Supply and Wiring

Details specifications and wiring for DC power supplies.

5.3 Residual Capacity of Main/Expansion Unit & Current Consumption of Expansion Module

Covers power supply residual capacity and expansion module current consumption.

5.4 Requirement of Power Sequence in Main Unit & Expansion Unit/Module

Chapter 6: Digital Input (DI) Circuit

6.1 Specifications of Digital Input (DI) Circuit

Lists the specifications for digital input circuits.

6.2 Structure and Wiring of 5VDC Ultra High Speed Differential Input Circuit

6.3 24VDC Single-End Input Circuit and Wiring for SINK/SRCE input

Chapter 7: Digital Output (DO) Circuit

7.1 Specifications of Digital Output Circuits

Lists the specifications for digital output circuits.

7.2 5VDC Ultra High Speed Line-Driver Differential Output Circuit and its Wiring

7.3 Single-End Output Circuit

Chapter 8: Test Run, Monitoring and Maintenance

8.1 Inspection after Wiring and Before First Time Power on

Outlines checks before powering on the PLC for the first time.

8.2 Test Run and Monitoring

Explains the procedures for testing and monitoring PLC operation.

8.3 LED Indicators on PLC Main Unit and Troubleshooting

Details LED indicators and basic troubleshooting steps.

Chapter 1: PLC Ladder Diagram and the Coding Rules of Mnemonic

1.1 The Operation Principle of Ladder Diagram

Explains the fundamental operation principles of ladder diagrams.

1.3 Ladder Diagram Structure and Terminology

1.4 The Coding Rules of Mnemonic

Chapter 2: FBS-PLC Memory Allocation

2.1 FBS-PLC Memory Allocation

Details the memory allocation structure of FBS-PLC.

2.2 Digital and Register Allocations

2.3 Special Relay Details

2.4 Special Registers Details

Chapter 3: FBS-PLC Instruction Lists

3.1 Sequential Instructions

Lists and describes sequential instructions used in FBS-PLC.

3.2 Function Instructions

Categorizes and describes the various function instructions available.

Chapter 5: Description of Function Instructions

5.1 The Format of Function Instructions

Details the structure and format of function instructions.

5.2 Use Index Register(XR) for Indirect Addressing

5.3 Numbering System

Chapter 6: Basic Function Instructions

T (Timer)

Details the Timer (T) function, including its operation and parameters.

C (Counter)

Details the Counter (C) function, including its operation and parameters.

SET

RESET

Master Control Loop Instructions (FUN 0 MC, FUN 1 MCE)

Skip Loop Instructions (FUN 2 SKP, FUN 3 SKPE)

Differential Instructions (FUN 4 DIFU, FUN 5 DIFD)

Chapter 7: Advanced Function Instructions

Arithmetical operation instructions (FUN23～32)

Logical operation instructions (FUN35～36)

Comparison instruction (FUN37)

Data movement instructions1 (FUN40～50)

Flow control instructions2 (FUN65～71)

I／O instructions (FUN74～86)

Cumulative timer instructions (FUN87～89)

Watchdog timer instructions (FUN90～91)

Covers Watchdog Timer (WDT) and Reset Watchdog Timer (RSWDT) instructions.

High speed counting／timing (FUN92～93)

Details High Speed Counter (HSCTR, HSCTW) access instructions.

Table instructions (FUN100～114)

Matrix instructions (FUN120～130)

NC positioning instructions (FUN139～143)

Explains instructions for NC positioning control.

Enable／Disable instructions (FUN145～146)

Communication instructions (FUN150～151)

Details communication instructions for Modbus and CPU Link.

Data movement instructions2 (FUN160)

Floating Arithmetical operation instructions(FUN200～213)

Chapter 8: Step Instruction Description

8.1 The Operation Principle of Step Ladder Diagram

8.2 Basic Formation of Step Ladder Diagram

Details the basic structures of step ladder diagrams.

8.3 Instruction of Step Introduction: STP, FROM, TO, and STPEND

Introduces STP, FROM, TO, and STPEND step instructions.

8.4 Notes for Writing a Step Ladder Diagram

8.5 Application Examples

8.6 Syntax Check Error Codes for Step Instruction