FATEK FBs-60MA Series User Manual

【Hardware】
Contents
Chapter 1：Introduction of FATEK FBS Series PLC
1.1 Appearance of Main Unit...............................................................................................................H1-1
1.2 Appearance of Expander/Module.................................................................................................H1-2
1.3 Appearance of Communication Expansion Module ....................................................................H1-4
1.4 List of FBS-PLC Models ................................................................................................................H1-5
1.5 Specifications of Main Unit ............................................................................................................H1-7
1.6 Environmental Specifications ........................................................................................................H1-8
1.7 Connection Diagrams of Various Models.....................................................................................H1-9
1.7.1 NC Control Main Unit..............................................................................................................H1-9
1.7.2 Basic/Advanced Main Unit .....................................................................................................H1-10
1.7.3 Digital I/O Expander................................................................................................................H1-12
1.7.4 Digital I/O Expansion Module.................................................................................................H1-13
1.7.5 High-Density Digital I/O Expansion Module ..........................................................................H1-14
1.7.6 Numeric I/O Expansion Module.............................................................................................H1-14
1.7.7 Analog I/O Expansion Module ...............................................................................................H1-14
1.7.8 Temperature Input Module.....................................................................................................H1-15
1.7.9 Expansion Power....................................................................................................................H1-15
1.7.10 Communication Module (CM)..............................................................................................H1-16
1.7.11 Communication Board (CB).................................................................................................H1-17
1.8 Drawings with External Dimensions .............................................................................................H1-18
Chapter 2：System Architecture
2.1 Single-Unit System of FBS-PLC...................................................................................................H2-1
2.2 Formation of Multiple Units............................................................................................................H2-2
2.2.1 Connection of multiple FBS-PLC...........................................................................................H2-2
2.2.2 Connection of FBS-PLC with host computer or intelligent peripherals................................H2-3
Chapter 3：Expansion of FBS-PLC
3.1 I/O Expansion.................................................................................................................................H3-1

FATEK FBs-60MA Series Specifications

General

Model	FBs-60MA
Series	FBs
Input Voltage	24V DC
Digital Inputs	36
Digital Outputs	24
Output Type	Relay
Communication Ports	RS-232, RS-485
Pulse Outputs	2
Type	PLC
Programming Language	Ladder Diagram
Analog Inputs	8
Analog Outputs	4
Operating Temperature	0°C to 55°C
Storage Temperature	-20°C to 70°C
Humidity	5% to 95% (non-condensing)

Summary

Introduction to FATEK FBS Series PLC

List of FBS PLC Models

Provides a comprehensive list of FBS PLC models with their specifications.

Specifications of Main Unit

Lists key technical specifications for FBS-PLC Main Units, including memory and speed.

Environmental Specifications

Connection Diagrams of Various Models

Illustrates connection diagrams for different Main Units and Expansion Units/Modules.

System Architecture

Formation of Multi-Unit System

Describes how multiple PLC units and host computers can be integrated via communication ports.

Expansion of FBS-PLC

I/O Expansion

Details the expansion of Digital I/O and Numeric I/O through units or modules.

Expansion of Communication Port

Explains how to expand communication ports using Communication Boards (CB) or Modules (CM).

Installation Guide

Installation Environment

Specifies environmental conditions for FBS-PLC operation, including temperature and humidity.

Precautions of PLC Installation

Covers essential safety and installation precautions to avoid interference and damage.

Precautions on Construction and Wiring

Offers guidance on wire gauge, separation of wiring, and terminal block torque.

Power Supply Wiring, Power Consumption Calculation, and Power Sequence Requirement

Specifications of AC Power Sourced Power Supply and Wiring

Lists specifications and wiring details for AC power supplies used with FBS-PLC.

Specifications of DC Power Sourced Power Supply and Wiring

Details specifications and wiring for DC power supplies used with FBS-PLC.

Residual Capacity of Main/Expansion Unit & Current Consumption of Expansion Module

Provides data on residual capacity and current consumption for power matching.

Requirement of Power Sequence in Main Unit & Expansion Unit/Module

Explains the power sequence requirements for main and expansion units for correct I/O configuration.

Digital Input (DI) Circuit

Specifications of Digital Input (DI) Circuit

Lists electrical specifications and input signal details for DI circuits.

Structure and Wiring of 5VDC Ultra High Speed Differential Input Circuit

24VDC Single-End Input Circuit and Wiring for SINK/SRCE input

Digital Output (DO) Circuit

Specifications of Digital Output Circuits

5VDC Ultra High Speed Line-Driver Differential Output Circuit and its Wiring

Single-End Output Circuit Structure and Wiring

Covers structure and wiring for single-end relay, transistor, and TRIAC output circuits.

Output Device Protection and Noise Suppression

Discusses protection methods for output devices like relays and transistors against surges.

Test Run, Monitoring and Maintenance

Inspection after Wiring and Before First Time Power on

Guides on pre-power-on checks, including wiring consistency and safety.

Test Run and Monitoring

Explains how to perform test runs, monitor I/O status, and use disable/enable features.

LED Indications on PLC Main Unit and Troubleshooting

Details the meaning of PLC LED indicators and basic troubleshooting steps.

FBs-PLC Memory Allocation

FBs-PLC Memory Allocation

Details the structure of PLC memory, including SRAM and FBS-PACK, for various data types.

Digital and Register Allocations

Lists the allocation and range for digital and register types (X, Y, M, T, C, R, D, etc.).

FBs-PLC Instruction Lists

Sequential Instructions

Function Instructions

Introduces basic and advanced function instructions, including arithmetic, logical, and data movement.

Advanced Function Instructions

Arithmetical operation instructions (FUN23～32)

Logical operation instructions (FUN35～36)

Comparison instruction (FUN37)

Data movement instructions1 (FUN40～50)

Shifting／Rotating instructions (FUN51～54)

Code conversion instructions (FUN55～64)

Flow control instructions2 (FUN65～71)

Covers END, LBL, JMP, CALL, RTS, RTI, FOR, and NEXT instructions for program flow control.

I／O instructions (FUN74～86)

Cumulative timer instructions (FUN87～89)

Watchdog timer instructions (FUN90～91)

Covers Watchdog Timer (WDT) and Reset Watchdog Timer (RSWDT) instructions for system safety.

High speed counting／timing (FUN92～93)

Slow up／Slow down instructions (FUN95)

Table instructions

Matrix instructions

NC positioning instructions (FUN140～143)

Enable／Disable instructions (FUN145～146)

Communication instructions (FUN150～151)

Data movement instructions2 (FUN160)

Floating Point Number operation instructions(FUN200～213)

Covers floating-point operations: Integer to Float, Float to Integer, Add, Subtract, Multiply, Divide, Compare.

Step Instruction Description

The Operation Principle of Step Ladder Diagram

Basic Formation of Step Ladder Diagram

Introduction of Step Instructions: STP, FROM, TO and STPEND

Defines the initial step (STP), transfer (FROM, TO), and end (STPEND) instructions.

Notes for Writing a Step Ladder Diagram