FATEK FBs-32MA Series User Manual (English)

To Next Page

【Hardware】

Contents

Chapter 1：Introduction of FATEK FBS Series PLC

1.1 Appearance of Main Unit...............................................................................................................H1-1

1.2 Appearance of Expander/Module.................................................................................................H1-2

1.3 Appearance of Communication Expansion Module ....................................................................H1-4

1.4 List of FBS-PLC Models ................................................................................................................H1-5

1.5 Specifications of Main Unit ............................................................................................................H1-7

1.6 Environmental Specifications ........................................................................................................H1-8

1.7 Connection Diagrams of Various Models.....................................................................................H1-9

1.7.1 NC Control Main Unit..............................................................................................................H1-9

1.7.2 Basic/Advanced Main Unit .....................................................................................................H1-10

1.7.3 Digital I/O Expander................................................................................................................H1-12

1.7.4 Digital I/O Expansion Module.................................................................................................H1-13

1.7.5 High-Density Digital I/O Expansion Module ..........................................................................H1-14

1.7.6 Numeric I/O Expansion Module.............................................................................................H1-14

1.7.7 Analog I/O Expansion Module ...............................................................................................H1-14

1.7.8 Temperature Input Module.....................................................................................................H1-15

1.7.9 Expansion Power....................................................................................................................H1-15

1.7.10 Communication Module (CM)..............................................................................................H1-16

1.7.11 Communication Board (CB).................................................................................................H1-17

1.8 Drawings with External Dimensions .............................................................................................H1-18

Chapter 2：System Architecture

2.1 Single-Unit System of FBS-PLC...................................................................................................H2-1

2.2 Formation of Multiple Units............................................................................................................H2-2

2.2.1 Connection of multiple FBS-PLC...........................................................................................H2-2

2.2.2 Connection of FBS-PLC with host computer or intelligent peripherals................................H2-3

Chapter 3：Expansion of FBS-PLC

3.1 I/O Expansion.................................................................................................................................H3-1

Other manuals for FATEK FBs-32MA Series

User Manual67 pages

Need help?

Do you have a question about the FATEK FBs-32MA Series and is the answer not in the manual?

FATEK FBs-32MA Series Specifications

General

Model	FBs-32MA
Series	FBs
Digital Inputs	16
Digital Outputs	16
Output Type	Relay
Power Supply	24V DC
Communication Ports	RS-232, RS-485
High-speed Counters	4
Pulse Output	2
Weight	0.5 kg
Type	PLC (Programmable Logic Controller)
Programming Language	Ladder Diagram
Operating Temperature	0°C to 55°C
Storage Temperature	-20°C to 70°C
Humidity	5% to 95% (non-condensing)

Summary

Chapter 1: Introduction of FATEK FBS Series PLC

1.5 Specifications of Main Unit

Outlines the technical specifications of the main unit, including execution speed, memory, and register details.

1.6 Environmental Specifications

1.7 Connection Diagrams of Various Models

Illustrates connection diagrams for different FBS-PLC models like NC Control, Basic/Advanced Main Units.

Chapter 3: Expansion of FBS-PLC

3.1 I/O Expansion

Details the expansion of FBS-PLC I/O using Digital I/O and Numeric I/O through expansion units or modules.

3.1.1 Digital I/O Expansion and I/O Numbering

3.1.2 Numeric I/O Expansion and I/O Channel Mapping

Chapter 4: Installation Guide

4.1 Installation Environment

Specifies the environmental requirements for FBS-PLC installation, excluding hazardous conditions.

4.2 Precautions of PLC Installation

Provides essential precautions for PLC installation to avoid interference and ensure proper operation.

4.5 Precautions on Construction and Wiring

Offers critical precautions for wiring and construction to ensure safety and prevent damage.

Chapter 5: Power Supply Wiring, Power Consumption Calculation, and Power Sequence Requirement

5.1 Specifications of AC Power Sourced Power Supply and Wiring

Lists specifications and wiring details for available AC power supplies for FBS-PLC main and expansion units.

5.2 Specifications of DC Power Sourced Power Supply and Wiring

Details specifications and wiring for DC power supplies, including POW-10-D, POW-16-D, and FBS-EPOW-D.

5.3 Residual Capacity of Main/Expansion Unit & Current Consumption of Expansion Module

Provides residual capacity and current consumption data for main, expansion, and expansion power modules.

5.4 Requirement of Power Sequence in Main Unit & Expansion Unit/Module

Chapter 6: Digital Input (DI) Circuit

6.1 Specifications of Digital Input (DI) Circuits

Details specifications for 5VDC differential and 24VDC single-end input circuits, including speeds and wiring.

6.2 Structure and Wiring of 5VDC Ultra High Speed Differential Input Circuit

6.3 24VDC Single-End Input Circuit and Wiring for SINK/SRCE input

Chapter 7: Advanced Function Instructions

Arithmetical operation instructions (FUN23～32)

Comparison instruction (FUN37)

Data movement instructions1 (FUN40～50)

Code conversion instructions (FUN55～64)

Cumulative timer instructions (FUN87～89)

Watchdog timer instructions (FUN90～91)

Covers WATCHDOG TIMER (FUN90) for setting scan time limits and RESET WATCHDOG TIMER (FUN91).

High speed counting／timing (FUN92～93)

Slow up／Slow down instructions (FUN95)

Table instructions (FUN100～114)

Matrix instructions (FUN120～130)

Explains matrix operations including AND, OR, XOR, XNOR, MINV, MCMP, MBRD, MBWR, MBSHF, MBROT, MBCNT.

NC positioning instructions (FUN139～143)

Details instructions for controlling NC positioning, such as HSPSO (FUN140) and MPARA (FUN141).

Enable／Disable instructions (FUN145～146)

Communication instructions (FUN150～151)

Explains communication instructions like MODBUS MASTER (FUN150) and COMMUNICATION LINK (FUN151).

Data movement instructions2 (FUN160)

Floating Point Number operation instructions(FUN200～213)

Covers floating-point operations: Integer to Float (FUN200), Float to Integer (FUN201), ADD (FUN202), SUB (FUN203), MUL (FUN204), DIV (FUN205), CMP (FUN206), FZCP (FUN207), FSQR (FUN208), FSIN (FUN209), FCOS (FUN210), FTAN (FUN211), FNEG (FUN212), FABS (FUN213).