FATEK FBs-CB5 User Manual

【Hardware】
Contents
Chapter 1：Introduction of FATEK FBS Series PLC
1.1 Appearance of Main Unit...............................................................................................................H1-1
1.2 Appearance of Expander/Module.................................................................................................H1-2
1.3 Appearance of Communication Expansion Module ....................................................................H1-4
1.4 List of FBS-PLC Models ................................................................................................................H1-5
1.5 Specifications of Main Unit ............................................................................................................H1-7
1.6 Environmental Specifications ........................................................................................................H1-8
1.7 Connection Diagrams of Various Models.....................................................................................H1-9
1.7.1 NC Control Main Unit..............................................................................................................H1-9
1.7.2 Basic/Advanced Main Unit .....................................................................................................H1-10
1.7.3 Digital I/O Expander................................................................................................................H1-12
1.7.4 Digital I/O Expansion Module.................................................................................................H1-13
1.7.5 High-Density Digital I/O Expansion Module ..........................................................................H1-14
1.7.6 Numeric I/O Expansion Module.............................................................................................H1-14
1.7.7 Analog I/O Expansion Module ...............................................................................................H1-14
1.7.8 Temperature Input Module.....................................................................................................H1-15
1.7.9 Expansion Power....................................................................................................................H1-15
1.7.10 Communication Module (CM)..............................................................................................H1-16
1.7.11 Communication Board (CB).................................................................................................H1-17
1.8 Drawings with External Dimensions .............................................................................................H1-18
Chapter 2：System Architecture
2.1 Single-Unit System of FBS-PLC...................................................................................................H2-1
2.2 Formation of Multiple Units............................................................................................................H2-2
2.2.1 Connection of multiple FBS-PLC...........................................................................................H2-2
2.2.2 Connection of FBS-PLC with host computer or intelligent peripherals................................H2-3
Chapter 3：Expansion of FBS-PLC
3.1 I/O Expansion.................................................................................................................................H3-1

FATEK FBs-CB5 Specifications

General

Brand	FATEK
Model	FBs-CB5
Category	Controller
Language	English

Summary

Chapter 1: Introduction of FATEK FBS Series PLC

1.1 Appearance of Main Unit

Describes the physical structure and case sizes of FBS-PLC main units.

1.2 Appearance of Expander/Module

Details the three types of cases for FBS-PLC expansion units/modules.

1.3 Appearance of Communication Expansion Module

Describes the 25mm-width case Communication Module (CM) for FBS-PLC.

1.4 List of FBS-PLC Models

Provides a table listing FBS PLC models and their specifications.

1.5 Specifications of Main Unit

Outlines the technical specifications for FBS-PLC main units.

1.7 Connection Diagrams of Various Models

Illustrates the terminal block connection diagrams for various FBS-PLC models.

Chapter 2: System Architecture

2.1 Single-Unit System of FBS-PLC

Explains the block diagram of the Single-Unit system of FBs-PLC.

2.2 Formation of Multiple Units

Details how multiple Single-Unit PLC systems integrate for resource sharing.

Chapter 3: Expansion of FBS-PLC

3.1 I/O Expansion

Covers the expansion of Digital I/O (DI/O) and Numeric I/O (NI/O) through units/modules.

3.2 Expansion of Communication Port

Explains how to expand communication ports using Communication Boards (CB) or Modules (CM).

Chapter 4: Installation Guide

4.2 PLC Installation Precautions

Provides essential precautions for installing the PLC to avoid interference.

4.3 Fixation by DIN RAIL

Describes the DIN RAIL fixation method for PLC units.

4.4 Fixation by Screws

Details the screw fixation method for PLC units, considering vibration.

Chapter 5: Wiring of Power Supply, Power Consumption Calculation, and Power Sequence Requirement

5.1 Specifications and Wiring of AC Power Sourced Power Supply

Lists specifications and wiring diagrams for AC power supplies.

5.2 Specifications and Wiring of DC Power Sourced Power Supply

Lists specifications and wiring diagrams for DC power supplies.

5.3 Residual Capacity of Main/Expansion Unit & Current Consumption of Expansion Module

Discusses residual capacity and current consumption for expansion modules.

5.4 Requirement of Power Sequence in Main Unit & Expansion Unit/Module

Details the power sequence requirements for main and expansion units.

Chapter 6: Digital Input (DI) Circuits

6.1 Specifications of Digital Input (DI) Circuits

Provides specifications for Digital Input (DI) circuits.

6.2 Structure and Wiring of 5VDC Ultra High Speed Differential Input Circuit

Explains the structure and wiring for 5VDC differential input circuits.

6.3 24VDC Single-End Input Circuit and Wiring for SINK/SRCE Input

Covers 24VDC single-end input circuits and SINK/SRCE wiring.

Chapter 7: Digital Output (DO) Circuits

7.1 Specifications of Digital Output Circuits

7.2 5VDC Ultra High Speed Line-Driver Differential Output Circuit and its Wiring

7.3 Single-End Output Circuit

Chapter 8: Test Run, Monitoring and Maintenance

8.1 Inspection after Wiring and Before First Time Power on

Outlines checks before initial power-on after wiring.

8.2 Test Run and Monitoring

8.3 LED Indications on PLC Main Unit and Troubleshooting

Explains PLC main unit LED indicators and troubleshooting steps.

Chapter 8: Step Instruction Description

8.1 The Operation Principle of Step Ladder Diagram

8.2 Basic Formation of Step Ladder Diagram

8.3 Instruction of Step Introduction: STP, FROM, TO, and STPEND

Introduces STP, FROM, TO, and STPEND step instructions.

8.4 Notes for Writing a Step Ladder Diagram