Do you have a question about the FATEK FBs-CM5H and is the answer not in the manual?
Model | FBs-CM5H |
---|---|
Category | Controller |
Input Voltage | 24V DC |
Digital Inputs | 8 |
Digital Outputs | 6 |
Compatibility | FATEK FBs series |
Analog Outputs | 0 |
Communication Ports | RS-485 |
Programming Language | Instruction List |
Memory | Flash |
Operating Temperature | 0°C to 60°C |
Storage Temperature | -20°C to 70°C |
Humidity | 5% to 95% |
Weight | 0.3kg |
Type | Programmable Logic Controller (PLC) |
Provides a comprehensive list of FATEK FBS PLC models and their specifications.
Lists key technical specifications for FBS-PLC main units, including performance and memory.
Illustrates wiring and terminal connections for different FBS-PLC models.
Details how to integrate multiple FBS-PLC units for resource sharing and expanded capabilities.
Covers the expansion of digital and numeric I/O points using FBS-PLC modules.
Provides essential guidelines for safely and correctly installing FBS-PLC hardware.
Outlines critical safety measures and best practices for PLC wiring.
Details the specifications and wiring for AC-powered FBS-PLC units.
Details the specifications and wiring for DC-powered FBS-PLC units.
Provides data on power supply residual capacity and module current draw.
Explains the power-up sequence requirements for main and expansion units.
Lists the specifications for various FBS-PLC digital input circuits.
Lists the specifications for FBS-PLC digital output circuits.
Covers protection and noise suppression for digital output devices.
Guides on pre-power-on checks for correct wiring and installation.
Details procedures for testing PLC operation and monitoring system status.
Explains PLC LED indicators and provides troubleshooting guidance.
Provides general guidelines for FBS-PLC maintenance procedures.
Explains the fundamental principles and operation of ladder diagrams.
Provides guidelines for translating ladder diagrams into mnemonic code.
Describes the internal memory structure and allocation of FBS-PLC.
Details the allocation of digital I/O, relays, and registers within the PLC.
Explains the structure and components of FBS-PLC function instructions.
Covers arithmetic operations including addition, subtraction, multiplication, division.
Covers instructions for moving and manipulating data between registers.
Explains instructions for handling input/output signals and special I/O functions.
Explains Watchdog Timer (WDT) and Reset Watchdog Timer (RSWDT) instructions.
Details instructions for Hardware High Speed Counter (HSC) and Timer (HST).
Covers instructions for manipulating data stored in tables or registers.
Explains instructions for performing operations on matrix data.
Details instructions for controlling NC positioning operations.
Covers instructions for Modbus master and communication link operations.
Explains instructions for floating-point arithmetic and conversions.
Provides essential guidelines and best practices for writing step ladder programs.