FATEK FBs-4PT User Manual

FBs-PLC User’s Manual【Hardware】
Contents
Chapter 1：Introduction of FATEK FBs Series PLC
1.1 Appearance of Main Unit ................................................................................................................. H1-1
1.2 Appearance of Expansion Unit/Module .......................................................................................... H1-2
1.3 Appearance of Communication Expansion Module ..................................................................... H1-4
1.4 List of FBs-PLC Models ................................................................................................................... H1-5
1.5 Specifications of Main Unit ............................................................................................................... H1-8
1.6 Environmental Specifications .......................................................................................................... H1-9
1.7 Connection Diagrams of Various Models ...................................................................................... H1-10
1.7.1 NC Control Main Unit (MN) ........................................................................................................................... H1-10
1.7.2 Basic/Advanced Main Unit (MA/MC) ........................................................................................................... H1-11
1.7.3 Digital I/O Expansion Unit .............................................................................................................................. H1-13
1.7.4 Digital I/O Expansion Module ........................................................................................................................ H1-14
1.7.5 High-Density Digital I/O Expansion Module ................................................................................................ H1-15
1.7.6 Numeric I/O Expansion Module .................................................................................................................... H1-15
1.7.7 Analog I/O Expansion Module ...................................................................................................................... H1-15
1.7.8 Temperature Input Module ............................................................................................................................ H1-16
1.7.9 AI/AO/Temperature Combo Module .......................................................................................................... H1-17
1.7.10 Expansion Power Module ......................................................................................................................... H1-17
1.7.11 Voice Output Module ................................................................................................................................... H1-17
1.7.12 Potential Meter Module .............................................................................................................................. H1-17
1.7.13 Load Cell Module ....................................................................................................................................... H1-17
1.7.14 Communication Module (CM) .................................................................................................................... H1-18
1.7.15 Communication Board (CB) ........................................................................................................................ H1-19
1.7.16 Analog Expansion Board ........................................................................................................................... H1-20
1.7.17 Simple HMI .................................................................................................................................................... H1-20
1.8 Drawings with External Dimensions ............................................................................................... H1-21
Chapter 2：System Configuration
2.1 Single-Unit System of FBs-PLC ...................................................................................................... H2-1

FATEK FBs-4PT Specifications

General

Model	FBs-4PT
Type	Temperature Input Module
Input Points	4
Power Consumption	1.5W
Operating Temperature	-10°C to 55°C
Storage Temperature	-20°C to 70°C
Communication Interface	RS-485
Thermocouple Type	K, J, E, S, T, R, B, N
RTD Type	PT100
Resolution	0.1°C
Sampling Rate	100ms per channel
Isolation	1500Vrms
Power Supply	24 VDC
Input Type	Thermocouple or RTD
Humidity	5 to 95% (non-condensing)

Summary

Chapter 3 Expansion of FBS-PLC

3.1 I/O Expansion

Details the process and limits for expanding Digital and Numeric I/O points in an FBs-PLC system.

3.2 Expansion of Communication Port

Explains how to add communication ports using Communication Boards (CB) and Modules (CM).

Chapter 4 Installation Guide

4.2 PLC Installation Precautions

Chapter 5 Power Supply Wiring, Power Consumption Calculation, and Power Sequence Requirements

5.1 Specifications and Wiring of AC Power Sourced Power Supply

Details specifications and wiring for AC power supplies used with FBs-PLC units.

5.2 Specifications and Wiring of DC Power Sourced Power Supply

Lists specifications and wiring instructions for DC power supplies for FBs-PLC.

5.3 Residual Capacity of Main/Expansion Unit & Current Consumption of Expansion Module

Provides data on power supply capacities and current draw for FBs-PLC modules.

5.4 Requirement of Power Sequence in Main Unit & Expansion Unit/Module

Explains the necessary power-up sequence for main and expansion units to ensure correct I/O detection.

Chapter 6 Digital Input (DI) Circuit

6.1 Specifications of Digital Input (DI) Circuit

Outlines specifications for 5VDC differential and 24VDC single-end digital input circuits.

6.2 Structure and Wiring of 5VDC Ultra High Speed Differential Input Circuit

6.3 24VDC Single-End Input Circuit and Wiring for SINK/SOURCE Input

Chapter 7 Digital Output (DO) Circuit

7.1 Specifications of Digital Output Circuit

Lists specifications for differential and single-end transistor/relay output circuits.

7.2 5VDC Ultra High Speed Line-Driver Differential Output Circuit and its Wiring

7.3 Single-End Output Circuit

7.5 Output Device Protection and Noise Suppression in DO Circuit

Chapter 8 Test Run, Monitoring and Maintenance

8.1 Inspection After Wiring and Before First Time Power on

8.2 Test Run and Monitoring

Explains how to use the Disable/Enable feature for testing and monitoring I/O points.

8.3 LED Indicators on PLC Main Unit and Troubleshooting

Details the meaning of PLC indicators and common troubleshooting steps for errors.