Need help?Do you have a question about the FATMAN Mi-Tube and is the answer not in the manual?
General| Frequency Response | 20Hz - 20kHz |
|---|---|
| Input Impedance | 100k Ohms |
| Output Impedance | 4 Ohms, 8 Ohms |
| Tube Complement | 2 x 6N1 |
| Inputs | RCA |
| Type | Hybrid Tube Amplifier |
| Input Voltage | 220V AC |
Guidelines for safe operation, including ventilation, power, and cable management.
Prohibitions for safe operation, covering water, heat, physical damage, and internal access.
Instructions for connecting components to the amplifier, ensuring correct L/R pairing.
Guidance on connecting speakers, including wire type, impedance, and terminal securement.
Steps to wirelessly connect Bluetooth-enabled devices for audio playback.
Identifies the Input Select and Volume Control knobs on the front panel.
Details mains power, speaker outputs, and line inputs on the rear panel.
Troubleshooting steps for when the unit does not turn on.
Solutions for issues where no audio output is detected.
Diagnosing and fixing sound issues specific to one speaker channel.
Resolving crackling, distortion, unstable imaging, and interference.
Detailed technical parameters including power, frequency response, and impedance.
Information on the available color options for the amplifier.
To Next Page