Wireless Display / Miracast Connecting to Smart Devices
Troubleshooting
1. Insert Smart Device into HDMI port on projector.
2. Select Wireless App icon from projector Main Menu.
1. Projector will not power on
Check to ensure the power adapter is properly
connected and power light indicator is on.
2. Blurred image
Adjust focus wheel on projector until image is clear.
3. No image
Check to ensure the correct channel is selected on
projector. If you are connected via HDMI, ensure the
HDMI channel is selected in Input Source Menu.
4. Remote does not respond
- Use a quarter to open the back cover of remote to
ensure the plastic insert between the battery is
removed.
- Ensure there is nothing blocking the IR Window in front
of the projector.
- Ensure you are within range of the projector ( < 15 ft).
- Replace the battery.
1. Confirm that your Smart Device supports Widi/Miracast.
2. Select Widi/Miracast icon from projector Main Menu.
3. Open the wireless Display menu on your Smart Device.
4. Scan for device name “Projector” and connect.
5. Range: up to 15 ft
www.favientertainment.com
Widi/Miracast
Movie
Wireless App
Movie
DLNA
1. Select Network icon from projector Settings Menu.
2. Connect projector to the same WiFi network as your
Smart Device.
3. Verify that your Smart Device has a DLNA media sharing
app installed.
4. Select DLNA icon from projector Settings Menu.
5. Launch DLNA media sharing app on your Smart Device
to start displaying compatible media.
NOTE: Not for use with iOS devices.
Network
Picture Mode
N e t wo r k
Asd b zn xb c f
Asd b zf
Db znc f
To Previous Page
Loading...
