What to do if my FAVI RioHD-LED-2 shows 'NO SYNC' screen?
If the FAVI Projector displays a “NO SYNC” screen despite having a video source connected, first, examine your video source and video connections. Then, ensure that your projector is set to the correct video mode.
Why is the sound distorted when connecting my FAVI Projector to a stereo?
If the sound is distorted when you connect your FAVI projector to your stereo with an adapter cable, try setting the projector’s volume to 50% or lower. Then, use your stereo’s volume control to adjust the volume.
How to troubleshoot a FAVI Projector that will not power on?
If your FAVI Projector will not power on, make sure that the power supply is plugged in correctly. The power supply has a built-in indicator LED which should glow when plugged in.
What to do if FAVI Projector displays 'NO SYNC' message?
If your FAVI Projector powers on but shows a 'NO SYNC' message, the issue likely lies with your video source selection or video cable connections. Please verify these connections to resolve the problem.
How to fix FAVI RioHD-LED-2 Projector when it will not power on?
If your FAVI Projector isn't powering on, ensure the power supply is correctly plugged in. The power supply has an indicator LED that should light up when properly connected.
General| Contrast Ratio | 1000:1 |
|---|---|
| Lamp Life | 20, 000 hours |
| Connectivity | HDMI, VGA, USB, AV |
| Image Size | 30" - 120" |
| Throw Ratio | 1.4:1 |
| Projection Size | 30" - 120" |
| Inputs | HDMI, VGA, USB, AV |
| Projection Distance | 3.3 to 12.5 feet |
Covers defects in material and workmanship for 45 days from receipt, including free repair or exchange.
Parts are covered for one year; labor and shipping costs are billed after the initial 45-day period.
FAQs and additional support information are available on the manufacturer's website.
Avoid temperatures above 104°F and keep away from liquids to prevent damage.
Do not look into the lens, ensure proper ventilation, and place on a stable surface.
Unplug before cleaning and during electrical storms to protect against surges.
Adjust desktop resolution to 800x600 or lower for better text clarity.
Verify connections, resolution, refresh rate, or laptop's projector mode setting.
Ensure the power supply is correctly plugged in and the indicator LED is glowing.
Check video source, connections, and ensure the correct video mode is selected.
Use the 'OK' button on the remote to select highlighted video modes, not the 'MENU' button.
Set projector volume to 50% or lower and control volume using the stereo system.
Rotate the lens clockwise to retract or counter-clockwise to extend for focus.
Table providing projected image sizes (4:3 and 16:9) at various distances from the screen.
Use the wheel on the bottom to correct trapezoidal image shape by moving left or right.
Rotate the foot counter-clockwise to extend and raise the projector's front height.
Connect via TV out (Composite, S-Video, Component) or VGA port; HDMI for compatible cards.
Supports resolutions up to 1920x1080; 60Hz refresh rate supported, higher rates are not.
To Next Page
