connected, sound is not
played through the speakers.
Speaker sound distorted Volume is too high When the volume is too high,
the sound coming through
the speakers may be
distorted. If this is the case,
the volume level should be
lowered.
Balance between sounds
isn't good
Various volume levels need
adjusting
Check the levels of the
'Master vol' and 'Accom. vol'.
Unexpected sound effects Various sound effects are
turned on or off
Check the settings of the
sustain and vibrato effects.
Not all notes are registered
at the same time
Full sound reproduction may
not be possible due to
limited polyphony
When playing very complex
chords, it's possible that
some notes may not be
registered correctly due to
the limited polyphony of the
keyboard. Polyphony refers
to the ability to play a certain
amount of notes at the same
time.
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:
12-03-2019RV
Revision date and author's initials: -
To Next Page
Loading...