Need help?Do you have a question about the FB Jets F16 Falcon and is the answer not in the manual?
Details the recommended Loctite Hysol 9462 epoxy for assembly and its specific properties.
Covers initial checks, cleaning, and preparation of parts, ensuring a clean build process.
Inspect and prepare the forward fuselage, checking nose gear security and smooth operation.
Guides on inspecting fuel tanks, trimming tubes, and preparing lines for leak-free fuel system installation.
Details connecting fuel tanks, ensuring equal line lengths, and securely positioning them within the fuselage.
Covers installing the nose wheel steering servo, checking retract function, and final mounting.
Focuses on ensuring the correct function and fit of the nose gear doors before further assembly.
Details attaching the vertical fin and rudder, including servo installation and control horn setup.
Outlines the installation of horizontal stabilizers, elevator servos, and balancing procedures.
Describes joining the aft fuselage section, installing the exhaust pipe, and securing the assembly.
Guides on installing the engine and exhaust pipe, ensuring alignment, clearance, and securing connections.
Covers extending, installing, and testing the main landing gear and associated doors for proper operation.
Details the correct installation of aileron servos in the wings, including arm and linkage setup.
Explains setting aileron throws, ensuring no binding, and attaching control horns to the surfaces.
Instructions for fitting the cockpit tub, ensuring clearance for electronics, and preparing for installation.
Guides on completing radio gear installation, battery setup, and setting control surface throws and expo.
Procedures for checking and adjusting the aircraft's center of gravity to ensure stable flight characteristics.
Provides essential advice for test flights, including ground checks, weather, and critical flight parameters.
To Next Page
General