Do you have a question about the Fbt M12 X4 and is the answer not in the manual?
Channels | 4 |
---|---|
Input Sensitivity | 1.4V |
Frequency Response | 20Hz - 20kHz |
THD+N | <0.1% |
S/N Ratio | >110dB |
Input Impedance | 20 kOhm Balanced |
Input Connectors | XLR |
Output Connectors | Speakon |
Power Supply | 50/60Hz |
Protection | DC, Short circuit, Overheat, Overload |
Dimensions (W x H x D) | 483 x 88 mm |
Signal to Noise Ratio | >100dB |
Total Harmonic Distortion | <0.1% |
Avoid electric shock, fire, and moisture exposure risks by not opening the unit.
Ensure correct voltage, complete connections before power-up, manage earth loops, handle controls gently.
RCA REC STEREO, XLR MAIN OUT L/R, and RCA STEREO outputs for various audio connections.
Stereo line inputs, 24V phantom power activation, and Neutrik-Combo inputs with gain.
Mains power socket (90-245V) and fuse holder for power circuit protection.
Input channels with volume, voice control, and CH1 priority function for speech intelligibility.
Selector for audio sources (Aux, Tuner, Tape, CD) and ALL CH PRIORITY switch.
Master volume, BASS/HIGH EQ, PEAK LEDs, and MAIN OUT L/R level controls.
System On-Off switch and LED indicating phantom power activation.