Fbt Ventis 115A - Page 6

CARATTERISTICHE
FEATURES
CARATTERISTICHE
FEATURES
PROCESSED ACTIVE SPEAKER
- 700W + 200W RMS
- Woofer custom 250mm con bobina da 50mm
- Driver B&C con bocca da 25mm e bobina da 36mm
- Risposta in frequenza da 58Hz a 20kHz
- Tromba 80°H x 50°V ruotabile
- Staffa per installazione a muro (opzionale)
- Supporto per stativo da 35mm
- Maniglia in alluminio
- Cabinet in multistrato di betulla da 15mm
PROCESSED ACTIVE SPEAKER
- 10" LF woofer with 2" voice coil
- 1" exit throat B&C HF compression driver with 1.4" voice coil
- Frequency response from 58Hz to 20kHz
- 80°H x 50°V rotatable horn
- Wall bracket mount thread(optional)
- 1.38" top-heat
- Aluminium handle
- 0.59" birch plywood enclosure
- 700W + 200W RMS
PASSIVE REINFORCEMENT SPEAKER
- 300W / 8 Ohm
- Crossover passivo interno con protezione soft trip su WF e TW
- Connettori Speakon NL-4 IN & LINK out
- Risposta in frequenza da 60Hz a 18kHz
PASSIVE REINFORCEMENT SPEAKER
- 300W / 8 Ohm
- Built-in passive crossover with soft-trip protection for the WF & TW
- Speakon NL-4 IN & LINK out connectors
- Frequency response from 60Hz to 18kHz
4