Fcar F7S series User Manual

FCAR Product Manual
1
Statement
 This manual is designed for the use of FCAR products; it cannot be copied or stored
in any form (electronic, mechanical, photocopying, recording or otherwise) without
prior written permission being secured from Shenzhen FCAR Technology Co., Ltd.
 This manual is intended for professional vehicle repair technicians.
 This manual provides the operation methods for FCAR products only, and the
company accepts no responsibility for the consequences caused by attempting to use
the operation methods on other equipment.
 The company shall not accept any responsibility for accidents caused either by the
user personally or anyone else, or costs and expenses due to equipment damages
including equipment loss caused by the user’s abuse or misuse, arbitrary changes or
repairs or operation of the equipment in a manner not in accordance with the manual
requirements.
 This manual is written in accordance with the existing configuration and functions
of the product, and is subject to change without notice if the product adds new
configurations and functions.
If you have any questions, please contact us by the following ways:
Headquarters: 8F, Chuangyi Bldg., No. 3025 Nanhai Ave., Nanshan, Shenzhen, China
518060
Tel: 0086-755-82904730
Fax: 0086-755-83147605
E-mail: marketing@szfcar.com
Website: http://www.fcar.com

Fcar F7S series Specifications

General

Brand	Fcar
Model	F7S series
Category	Diagnostic Equipment
Language	English

Summary

Statement and Disclaimer

FCAR Host Machine Maintenance and Cautions

Automobile Inspection Safety Notes

Product Introduction and Host Structure

Introduction to FCAR F7S Product

Overview of the FCAR F7S series product and its applications.

F7S Host Structure Overview

Details the physical components and layout of the FCAR F7S host device.

VCI Box Structure and Indicators

VCI Box Structure Details

Details the physical components and indicators of the VCI box.

Host Operation and Function Menu

Host Charging Procedure

Explains how to charge the FCAR F7S host device.

Host Power Management and Menu Navigation

Host Booting and Shutdown Procedures

Details the steps for powering on and safely shutting down the FCAR F7S host.

FCAR F7S User Interface Navigation

Main Menu and Toolbar Elements

Describes the layout and key components of the FCAR F7S host's main user interface.

Vehicle Diagnosis Procedures

Establishing Vehicle Communication

Outlines the steps for establishing a stable connection between the diagnostic tool and the vehicle.

Performing Vehicle Diagnosis

Describes how to initiate vehicle diagnosis via auto scan or manual selection.

Pre-Diagnostic Requirements

Equipment and Vehicle Requirements

Lists necessary equipment and vehicle conditions before starting diagnosis.

Vehicle Connection Procedures

Connecting VCI Box to Vehicle

Details how to connect the VCI box to standard and non-standard OBD-II ports.

Host and VCI Box Connection Methods

Connecting Host to VCI Box

Details how to connect the F7S host and VCI box via Bluetooth or USB.

Vehicle Type Selection

Selecting Vehicle Model

Guides users through selecting the vehicle type from a list of manufacturers and regions.

Diagnosis Modes and Auto Scan

Auto Vehicle Selection Scan

Details the automatic scanning process to diagnose all vehicle systems.

Fault Code Management

Reading Fault Codes

How to read and display fault codes from the vehicle system.

Live Data Parameters

Reading Live Data Parameters

How to view real-time operating parameters of selected system modules.

Actuation Test Function

Performing Actuation Tests

Details how to perform component testing by instructing the ECU to drive actuators.

Special Functions Overview

Component Re-calibration and Configuration

Explains the purpose of special functions for re-calibration and configuration.

Jumper Holder and Jumper Components

Jumper Holder Description

Details the 15 holes on the jumper holder and their definitions.

Vehicle Communication Protocols

Common Communication Protocols Table

Lists protocols, lines, voltage ranges, and jumper hole numbers.

Data Management Functions

Overview of Data Management

Explains the purpose of the Data Management application for saving, viewing, and printing files.

Remote Diagnosis and Support

Receiving Technical Support from FCAR

Details how to get remote assistance from FCAR technicians using TeamViewer.

System and Software Updates

Updating Diagnostic Software

How to connect to the internet and update the diagnostic software and vehicle types.

Self Test and Activation

Performing Self Test

Checks for open and short circuits in the main test cable and OBD-II connector.

Compliance Information

FCC Compliance Statement

Details FCC rules, limits, and conditions for Class B digital devices.

Warranty Clauses and Conditions

Warranty Service Terms

Outlines the terms and conditions for free product warranty services.