FCI FireVac 7200 Series User Manual

301 2nd Ave. Waltham, MA 02451-1133 USA TEL: (781) 487-0088 FAX: (781) 370-4132
Copyright 1998 Part Number: 9000-0405
All Rights Reserved Version: 1.3
Published in the U.S.A.
FireVac
®
7200 SERIES
EMERGENCY VOICE/ALARM
FIRE ALARM CONTROL
INSTALLATION/OPERATING
ADDENDUM
Technical Manuals Online! - http://www.tech-man.com

FCI FireVac 7200 Series Specifications

General

Brand	FCI
Model	FireVac 7200 Series
Category	Security System
Language	English

Summary

IMPORTANT INFORMATION AND FOREWORD

Environmental Operating Conditions

Specifies operating temperature and humidity ranges for the equipment.

SECTION ONE: OVERVIEW OF FIREVAC 7200 SYSTEM

System Description and Configurations

Overview of the FireVac®7200 system, its capabilities, and configurations.

Key System Components Overview

Details on AEU, Command Center, modules, peripherals, and amplifiers.

SECTION TWO: INSTALLATION AND TERMINAL DESCRIPTIONS

Audio Evacuation Unit (AEU) Installation

Installation and wiring for the AEU, including address settings.

Backplane and Card Cage Modules

Backplane connections and modules within the card cage.

Control Module Operations

Details operation and controls for CCU, SIM, and TCU modules.

Amplifier and Distributed Amplification Systems

FCI-MB, amplifier modules, and distributed amplification systems.

Power Supply and Remote Command Centers

FCI-PSM power supply and remote command center setup.

Notification Appliances and Telephone System

Speakers, strobes, warden stations, and telephone receptacles.

Power Limited Field Wiring Requirements

Requirements for power limited field wiring.

SECTION THREE: POWER UP AND TEST PROCEDURES

Initial Setup, Power Up, and Programming

General checks, power-up sequence, and software programming.

System Testing and Walk Test Procedures

Procedures for system testing and dual mode walk tests.

Device Testing, Restoration, and Fire Drills

Testing devices, system restoration, and fire drill procedures.