06
How to jump starter your car
NOTE: This product is for 12V car only.
●Check to make sure that battery level is above 70% before you use it to jump start your car.
Step 1: Insert the plug of the smart battery clamp completely into the jump starter. If the green and red light
indicators on the battery clamp are flashing alternately you are safe to move on to to the next step.
Step 2: Connect the red clamp to the positive terminal(+) of the car battery and connect the black clamp to the
negative terminal(-) of the car battery. If the green light on the clamp is on with click sound, you are safe to
move on to the next step.
To Next Page
Loading...
