FDW DT-HB145 - User Manual

1. Connect part C end frame s
to part B side frames with part
1 screws (6 x 40mm)
2. Attach part A tabletop to assemble d
frame with six part 2 suction cups
DT-HB145
Please read the instruction manual carefully before using it.
Please assemble strictly in accordance with the instruction.
Please double check to the ensure that all parts of the package contents intact
If you any parts are missing, broken, damaged or worn, stop using this products until
repairs are made and factory replacement parts are installed.
WARNING
DINING TABLE SET

Summary

Dining Table Assembly Instructions

Connect Frame Components

Connects part C end frames to part B side frames using part 1 screws.

Attach Tabletop

Attaches part A tabletop to the assembled frame using part 2 suction cups.

Important Safety Warning

Read manual carefully, assemble strictly, and check all parts for completeness.

Dining Chair Assembly Instructions

Attach Backrest to Chair Legs

Connects part D backrest to chair legs using four part 4 screws.

Connect Support Beam

Connects part G support beam to part E and F legs with two part 5 screws.

Attach Seat to Chair Legs

Attaches part H seat to chair legs using four part 5 screws.

Assembly Note

Attach front two screws before back screws for easier assembly.

Chair Assembly Warning

Emphasizes reading instructions, strict assembly, and checking parts integrity.

Overview

1. Dining Table Set (DT-HB145)
2. Function Description
3. Important Technical Specifications
4. Usage Features
5. Maintenance Features (General Warning)
6. Dining Chair (DT-EE40)
7. Function Description
8. Important Technical Specifications
9. Usage Features
10. Maintenance Features (General Warning)
11. General Information Applicable to Both Products

This document provides assembly instructions for a dining table set (DT-HB145) and a dining chair (DT-EE40).

Dining Table Set (DT-HB145)

Function Description:

The DT-HB145 is a dining table designed for home use. It consists of a tabletop and a frame structure that supports it. The assembly process involves connecting the frame components and then attaching the tabletop.

Important Technical Specifications:

• Components:
  • Part A: Tabletop (1 piece)
  • Part B: Side frames (2 pieces)
  • Part C: End frames (2 pieces)
  • Part 1: Screws (6x40mm, 12 pieces) - used for connecting frame components.
  • Part 2: Suction cups (6 pieces) - used for attaching the tabletop.
  • Part 3: Not explicitly described in the assembly steps for the table, but 1 piece is included. Its function might be for other parts of the set or an alternative assembly.
• Dimensions of Screws: 6x40mm for frame assembly.

Usage Features:

• Assembly Steps:
  1. Frame Assembly: Connect the end frames (Part C) to the side frames (Part B) using the Part 1 screws (6x40mm). The diagram shows a clear sequence of attaching the end frames to the side frames, forming a rectangular base.
  2. Tabletop Attachment: Once the frame is assembled, attach the tabletop (Part A) to the assembled frame using the six Part 2 suction cups. These suction cups are designed to securely hold the glass or wooden tabletop in place on the metal frame.
• Visual Guidance: The instructions include detailed diagrams illustrating each component and the step-by-step assembly process, making it easier for the user to follow.

Maintenance Features (General Warning):

• Instruction Manual: Users are advised to read the instruction manual carefully before use.
• Strict Assembly: Assembly must be strictly in accordance with the provided instructions to ensure structural integrity and safety.
• Parts Verification: Users should double-check to ensure all parts of the package contents are intact.
• Missing/Damaged Parts: If any parts are missing, broken, damaged, or worn, users must stop using the product until repairs are made and factory replacement parts are installed. This emphasizes safety and the importance of using only intact components.

Dining Chair (DT-EE40)

Function Description:

The DT-EE40 is a dining chair designed to complement a dining table. It features a backrest, seat, and a leg structure with support beams for stability.

Important Technical Specifications:

• Components:
  • Part D: Backrest (4 pieces)
  • Part E: Left leg (4 pieces)
  • Part F: Right leg (4 pieces)
  • Part G: Support beam (4 pieces)
  • Part H: Seat (4 pieces)
  • Part 4: Screws (6x12mm, 16 pieces) - used for attaching the backrest.
  • Part 5: Screws (6x45mm, 24 pieces) - used for connecting support beams and attaching the seat.
  • Part 6: Not explicitly described in the assembly steps for the chair, but 1 piece is included. Its function might be for other parts of the set or an alternative assembly.
• Dimensions of Screws:
  • 6x12mm for backrest attachment.
  • 6x45mm for support beam and seat attachment.

Usage Features:

• Assembly Steps:
  1. Backrest Attachment: Attach the backrest (Part D) to the chair legs (Parts E and F) using four Part 4 screws (6x12mm) per chair. The diagram shows the backrest being screwed into the upper part of the chair legs.
  2. Support Beam Connection: Connect the support beam (Part G) to the left leg (Part E) and the right leg (Part F) using two Part 5 screws (6x45mm) per chair. These beams provide lateral stability to the chair legs.
  3. Seat Attachment: Attach the seat (Part H) to the chair legs using four Part 5 screws (6x45mm) per chair.
     • Assembly Tip: It is recommended to attach the front two screws before the back screws for easier assembly. This suggests a specific sequence to facilitate alignment and secure fitting of the seat.
• Visual Guidance: The instructions include detailed diagrams illustrating each component and the step-by-step assembly process, including specific screw placements and an assembly tip for the seat.
• Quantity: The parts list indicates quantities for assembling multiple chairs (e.g., 4 backrests, 4 left legs, 4 right legs, 4 support beams, 4 seats), suggesting the manual covers a set of chairs.

Maintenance Features (General Warning):

• Instruction Manual: Users are advised to read the instruction manual carefully before use.
• Strict Assembly: Assembly must be strictly in accordance with the provided instructions to ensure structural integrity and safety.
• Parts Verification: Users should double-check to ensure all parts of the package contents are intact.
• Missing/Damaged Parts: If any parts are missing, broken, damaged, or worn, users must stop using the product until repairs are made and factory replacement parts are installed. This emphasizes safety and the importance of using only intact components.

General Information Applicable to Both Products:

• Manufacturer/Brand: The website "www.paylesshere.com" is mentioned, indicating a potential source or brand for these products.
• Safety Warning: A comprehensive warning section is provided for both the table and the chair, highlighting critical safety and assembly guidelines. This includes reading the manual, following instructions strictly, verifying parts, and discontinuing use if parts are missing or damaged. This underscores the manufacturer's commitment to user safety and product longevity.

FDW DT-HB145 Specifications

General

Brand	FDW
Model	DT-HB145
Category	Indoor Furnishing
Language	English