FEASA LED ANALYSER
FUNCTIONAL VERSION
General Commands
getSERIAL Get the Serial Number of the Analyser
Transmit Receive
getSerial xxxx
Where: xxxx is an alphanumeric value. (Always 4 characters)
Description
This command will return the Serial Number of the Analyser. This is a unique number and is
useful if multiple LED Analysers are used in a System. The Controlling Software can query
each LED Analyser for it's Serial Number to ensure the correct Analyser is being controlled.
Example:
The PC transmits getserial to the LED Analyser an it will return xxxx to the PC.
getserial
75A6
Back to Index
46
To Next Page
Loading...