Ethernet-I/P Fieldbus Expansion Unit
PAGE 2
Revision History
Revision Date
Manual No. Contents of Revision
08/20/2014 AFC3000E-FB-EN-1 First Release
02/18/2016 AFC3000E-FB-EN-2 Added Message Write Data info (pg. 35-38)
01/19/2018 AFC3000E-FB-EN-2 Minor revision - Message Output formats fixed (pg.13-24)
03/19/2019 AFC3000E-FB-EN-3 Updated PLC Message examples
Any questions regarding the contents of this document or any related matter should be
directed to FEC Automation Systems at (586) 580-2622, faxed to (586) 580-2620 or emailed to
support@fec-usa.com.
The information set forth in the following document is the property of
FEC Automation Systems.
This document shall not be released to or copied for any person and/or organization without
the expressed prior consent of FEC Automation Systems.
Unauthorized reproduction or distribution of this manual is strictly prohibited.
Please contact FEC Automation Systems if you require additional copies.
Manual Numbering Convention
AFC3000E-FB-EN-1
DSP1500
DSP1500DSP1500
DSP1500 = Servo Press
AFC1500
AFC1500AFC1500
AFC1500 = Nutrunner
FUSION
FUSIONFUSION
FUSION = DC Hand Tool
HW = Hardware Operation Manual
SW = Software Manual
FB = Fieldbus Manual
DSP1500 = Servo Press
AFC3000 =
Nutrunner
E = English Version
S = Spanish Version
*Japanese Version furnished by DDK
uses DDK numbering convention.
Version Number
(Major Revision Level)
CC = CC-Link
DN = DeviceNet
PB = Profibus
PN = ProfiNet
= Ethernet-I/P
To Next Page
Loading...
