cover until
the click is
heard
.
For
convenience
in use the
shutter
cocking
lever has
two
positions: a
working
position
and a
transport
position. In
the workin
position the
lever end
protrudes
beyond the
camera
shield. To
shift the
lever from
the workin
position to
the
transport
one, it is
sufficient to
press on its
protruding
end (Fig. 7)
by applying
a small
force
.
To rewind the light-struck part
of the film and to set the picture
counter to the readin
«1», cock
the shutter several times,
pressing on the release button
(Fig. 7) each time. In this case
the operation mode indicator
limb must be set to an
position,
except the position «A», since
under conditions of insufficient
lighting or in the event of the
closed cap on the photographic
Fig. 7
To Next Page
Loading...
