Fedders CH1042CBD1VF User Manual

Residential & Light Commercial HVAC
CH10 High Efficiency Series
CH10 High Efficiency Series
10 SEER Remote Heat Pump Units
PERFORMANCE:
Efficiency rating of 10.0 SEER
Cooling and heating capacities from 1
1
⁄2 to 5 tons
Rated in accordance with D.O.E. test standards
FEATURES:
Quiet, top air discharge
G-90 galvanized steel exterior cabinet with
1000-hour salt spray, powder-coated finish
Long-life copper tubes, aluminum fin refrigerant coils
State-of-the-art compressors
Powder-coated fan guard
Full louvered panel to protect coil
Large wrap-around coil surface
Control box located for easy access to electrical controls
Formed base with 2
1
⁄2”ground clearance
Factory-installed liquid line filter dryer
WARRANTY:
Limited 10-year warranty on compressor
Limited 5-year warranty on all parts

Fedders CH1042CBD1VF Specifications

General

Type	Heat Pump
Refrigerant	R-410A
Phase	1
Voltage	208-230V
Voltage (V)	208-230

Summary

CH10 High Efficiency Series

Performance

Details efficiency rating, cooling/heating capacities, and test standards.

Features

Highlights key attributes like cabinet, coils, compressor, fan, controls, and base.

Warranty

Specifies limited 10-year warranty on compressor and 5-year on parts.

Model Specifications

Performance Data

Lists nominal cooling/heating BTU/H, SEER, CFM, and electrical specifications.

Compressor Data

Provides compressor RLA (Rated Load Amps) and LRA (Locked Rotor Amps).

Fan Data

Details fan diameter, motor type, horsepower, and RPM.

Outdoor Coil Specifications

Describes outdoor coil type, face area, and tube/fin configuration.

Refrigerant Line Connections

Specifies service valve port sizes for liquid and vapor lines.

Weight Information

Lists net and shipping weights for various models.

Cooling Performance Data

Matched system cooling data at extended outdoor ambient temperatures.

Heating Performance Data

Heating Data by Model

Matched system heating data (BTUH, HSPF, CFM) at various outdoor ambients.

Condenser Dimensions

Unit and Shipping Dimensions

Provides physical dimensions (A, B, C) for the condenser unit and shipping.