Chapter One: Setting Up FSMS
FedEx Ship Manager
®
Server User Guide, Version 7.6 43
Field Name Description
Phone Number* Enter your company phone number. No special characters, such as
dashes, are allowed.
Meter Time Zone FSMS allows you to select a time zone for each meter (both Master and
Child) configured on your server. This functionality allows you to
designate Close Times, etc. for each meter by its specific time zone.
Force Close Time Enter the most convenient time for FSMS to close your shipping day.
Force Close is activated only if you have not closed your shipping day 24
hours before the Force Close Time entered.
The Force Close Time is entered in military time (for example: 1:00 PM =
1300).
Force Close Time is a meter level setting.
Force Close time is defaulted to the nearest hour at the time the Master
meter is added. For example, if a meter is added at 3:37 PM, the Force
Close Time will default to 1500.
Child meters will default to the same time as the Master meter.
Email Address Enter the e-mail address for the shipping contact in your company.
Fax Number Enter the fax number for the shipping contact in your company.
Pager Number Enter the pager number for the shipping contact in your company.
* These elements will be printed on the shipping label. See the FSMS Transaction Coding Reference
(FSMS TCR Version 7.6) for instructions on how to override the configured information.
To save changes to the FSMS Configuration Utility, click Apply to save changes without closing the
FSMS Configuration Utility, or click Apply & Exit to save changes and exit the FSMS Configuration
Utility.
To exit without saving any changes, click Exit.
Remote Configuration
The FSMS Configuration Utility can be installed independently of the FSMS application to allow for
remote network configuration of the FSMS application. To install the FSMS Configuration Utility, run the
FSMS installation, select Custom install and Configuration Utility from the install options menu.
By default, the FSMS Configuration Utility will attempt to connect to the local installation of FSMS
(IP 127.0.0.0) when launched. If the FSMS Configuration Utility was installed for remote use, no local
connection will be established.
To connect to the FSMS application on another server on the network, click the Network button at the
bottom of the FSMS Configuration Utility. The following window will be displayed:
To Next Page
Loading...